Chevrolet Spark manuals

Mazda CX-5 Service & Repair Manual: Liftgate Adjustment

1. Measure the gap and height difference between the liftgate and the body.

2. Loosen the liftgate hinge installation bolts and adjust the liftgate.


3. Tighten the liftgate hinge installation bolts..

4. If the liftgate does not open/close smoothly, adjust it by loosening the liftgate lock striker installation screw..

5. Spray or pour water on the door and surrounding area using a hose or high pressure water pressure car wash and verify that there is no water leakage.

Hood Removal/Installation
WARNING: Removing the hood without supporting it could cause the hood to fall and cause serious injury. Always perform the procedure with at least another person to prevent the hood from ...

Liftgate Garnish Removal/Installation
1. Disconnect the negative battery cable.. 2. Remove the following parts: a. Liftgate upper trim. b. Liftgate side trim. c. Liftgate recess. d. Liftgate lower trim. 3. Disconnect the conne ...

Other materials:

Evaporative Emission (Evap) Control System
Purpose, Outline Prevents release of evaporative gas into the atmosphere. The intake manifold vacuum introduces evaporative gas to the intake manifold via the charcoal canister and the purge solenoid valve. System Diagram U.S.A. and CANADA Except U.S.A. and CANADA ...

Engine Disassembly/Assembly
CAUTION: When the transaxle is installed, do not suspend the engine. Otherwise, the SST installation area of the cylinder head may be damaged due to excess weight. Only suspend the engine after separating the engine and transaxle. Applying excessive force (force of 100 N {10.2 ...

Brake/Clutch Fluid
Inspecting Brake/Clutch Fluid Level The brakes and clutch draw fluid from the same reservoir. Inspect the fluid level in the reservoir regularly. It should be kept at MAX. The level normally drops with accumulated distance, a condition associated with wear of brake and clutch linings. If it is ...

© 2016-2026 Copyright www.mcx5.org