Mazda CX-5 Service & Repair Manual: Liftgate Adjustment
1. Measure the gap and height difference between the liftgate and the body.
2. Loosen the liftgate hinge installation bolts and adjust the liftgate.
-
Standard clearance
-
a: 5.2?7.2 mm {0.21?0.28 in}
-
b: -2.0?0 mm {-0.078?0.000 in}
-
c: 3.8?6.2 mm {0.15?0.24 in}
-
d: -1.6?0.8 mm {-0.06?0.03 in}
-
e: 3.8?7.8 mm {0.15?0.30 in}
3. Tighten the liftgate hinge installation bolts..
4. If the liftgate does not open/close smoothly, adjust it by loosening the liftgate lock striker installation screw..
5. Spray or pour water on the door and surrounding area using a hose or high pressure water pressure car wash and verify that there is no water leakage.
Hood Removal/Installation
WARNING:
Removing the hood without supporting it could cause the hood to fall and
cause serious injury. Always perform the procedure with at least another person
to prevent the hood from ...
Liftgate Garnish Removal/Installation
1. Disconnect the negative battery cable..
2. Remove the following parts:
a. Liftgate upper trim.
b. Liftgate side trim.
c. Liftgate recess.
d. Liftgate lower trim.
3. Disconnect the conne ...
Other materials:
Heated Oxygen Sensor (HO2 S) Heater Control [Skyactiv G 2.0]
Outline
Based on the control of the HO2S heater, a stabilized oxygen concentration
is detected even at low exhaust temperatures, and feedback control of fuel injection
even at cold engine start is made possible for improved cold temperature exhaust
emission performance.
Both ...
Dashboard Disassembly/Assembly
1. Disassemble in the order indicated in the table.
1
Wiring harness
2
Screw A
3
Screw B
4
Dashboard member
5
Screw C
6
Duct No.1
...
Lighting Systems
Outline
Front combination lights have been adopted with parts related to the front
exterior lights grouped and housed together.
The following systems have been adopted to the headlights.
Discharge headlight system (with discharge headlight system)
Auto light ...
