Mazda CX-5 Service & Repair Manual: TCM Configuration [Fw6 A EL, Fw6 Ax EL]
NOTE:
-
The TCM is built into the control valve body.
1. Verify TCM configuration implementation necessity for replacement parts.
|
Replacement part |
Configuration necessity |
|
Control valve body replacement |
Necessary |
|
Oil pressure switch replacement |
Unnecessary |
|
Automatic transaxle replacement |
Unnecessary |
|
ON/OFF solenoid replacement |
Unnecessary |
|
Coupler component replacement |
Unnecessary |
2. Connect the M-MDS to the DLC-2.
3. After vehicle identification, the following can be selected from the M-MDS initialization screen.
-
Select “Module Programming”
4. Then, select the following from the screen menu.
-
Select “Programmable Module Installation”
-
Select “TCM”
5. Perform the configuration following the instructions on the screen.
6. Verify that no DTCs are stored..
NOTE:
-
If any DTC (U code) is output, the system is normal.
7. Delete the U code and verify that no DTC is output..
-
If any DTC other than U code is output, repair the malfunctioning location according to the applicable DTC troubleshooting..
Synchronizer Mechanism [C66 M R]
Purpose, Function
For smooth gear changes, the synchronizer mechanism synchronizes the rotation
of the engaging area and engages gears.
Construction
Detent ball-type synchronizer ...
TCM [Fw6 A EL, Fw6 Ax EL]
Purpose/Function
The TCM detects the vehicle conditions and performs calculations and processing
based on input information from each type of sensor and switch.
Outputs control signa ...
Other materials:
Door Ajar Warning Light
Purpose
The door-ajar warning light notifies the driver that any door or the liftgate
is open.
Function
When the instrument cluster receives any of the following signals sent from
the rear body control module (RBCM) via the CAN signal, the door-ajar warning
light illumin ...
Clock Inspection
1. Disconnect the negative battery cable..
2. Remove the following parts:
a. Shift lever knob (MTX).
b. Front console box.
c. Shift panel.
d. Upper panel.
e. Rear console.
f. Side wall.
g. Decoration panel.
h. Front console.
i. Glove compartment.
j. Climate control unit.
3. C ...
Windshield Washer Nozzle Adjustment
CAUTION:
If the nozzle is adjusted by inserting a stick-like object into the nozzle,
it could deform the injection nozzle and the washer fluid may not spray normally.
When adjusting the nozzle, do not insert objects into the injection nozzle.
1. Insert a tape-wrapped precision fl ...
