Mazda CX-5 Service & Repair Manual: Timing Chain, Chain Tensioner
Purpose, Function
Timing chain
-
The timing chain transmits the rotation force of the crankshaft to the camshaft to perform the rotation timing of the crankshaft and camshaft.
Chain tensioner
-
The chain tensioner constantly maintains the timing chain tension and the timing chain operation is stabilized.
Construction
Timing chain
-
The timing chain is installed between the camshaft sprocket and crankshaft sprocket.
-
Lubrication of the timing chain and each sprocket is performed using the engine oil from the engine front cover.
-
Improvement of the rigidity of the chain guide and tensioner arm and the stability of the timing chain operation have reduced the sliding resistance.
Chain tensioner
-
The chain tensioner is installed to the cylinder block (engine front).
-
An oil pressure type chain tensioner has been adopted for the chain tensioner.
OPERATION
Chain tensioner
-
Fluctuation in the timing chain tension by oil pressure and spring force is suppressed, and the tension is maintained at a constant.
Timing Chain Removal/Installation
WARNING:
A hot engine can cause severe burns. Turn off the engine and wait until it
is cool before servicing.
CAUTION:
If the camshaft is rotated with the timing chain removed ...
Control
...
Other materials:
Power Brake Unit Inspection
NOTE:
The following inspection methods are simple inspection methods to judge the
function of the power brake unit.
If there is any malfunction in the power brake unit, replace the power brake
unit as a single unit.
Without Using SST
Operation inspection
1. With the eng ...
Tie Rod Inspection
1. Inspect for bending and damage.
If there is any malfunction, replace the tie rod.
2. Inspect for excessive play.
If there is any malfunction, replace the tie rod.
3. Swing the tie rod five times.
4. Measure the swing torque of the tie rod using a pull scale.
...
Cargo Compartment Light Bulb Removal/Installation
1. Disconnect the negative battery cable..
CAUTION:
Always disconnect the negative battery cable before performing the cargo
compartment light bulb removal. Otherwise, the circuit may be shorted resulting
in damage to the related parts such as the rear body control module (RBCM).
...
