Chevrolet Spark manuals

Mazda CX-5 Service & Repair Manual: Instrument Cluster Disassembly/Assembly

Mazda CX-5 Service & Repair Manual / Body / Driver Info & Control / General / Instrument Cluster Disassembly/Assembly

CAUTION:

1. Move a tape-wrapped flathead screwdriver in the direction of the arrow shown in the figure, lift up the cover while pressing the cover tab, and disengage the cover tab from the instrument cluster.


2. Disengage all the cover tabs from the instrument cluster and remove the cover.

3. Assemble in the reverse order of disassembly.

Instrument Cluster Configuration (Using Read/Write Function)
NOTE: When performing configuration, it is necessary to read the vehicle specification information from the instrument cluster before replacing it. Connect the M-MDS to the vehicle and p ...

Instrument Cluster Inspection
Speedometer inspection Using a speedometer tester 1. Adjust the tire pressure to the specification. 2. Using a speedometer tester, verify that the tester reading is as indicated in the following ...

Other materials:

Starter Inspection [Skyactiv G 2.0]
On-vehicle Inspection 1. Verify that the battery is fully charged. 2. The starter is normal if it rotates smoothly and without any noise when the engine is cranked. If the starter does not operate, inspect the following: Remove the starter, and inspect the starter unit. ...

Audio Amplifier
Purpose, Function The audio signal (analog voltage waveform) output from the unit equipped on the vehicle is converted into a digital pulse. The converted digital pulse signal is amplified and sent to the speakers. Construction The audio amplifier is placed in the front sid ...

Cruise Set Indicator Light (Green)
Purpose/Function Illuminates during the cruise control system operation to inform the driver that the cruise control system is operating. Construction Built into the instrument cluster. Operation Illuminates during the cruise control system operation. ...

© 2016-2024 Copyright www.mcx5.org