Mazda CX-5 Service & Repair Manual: Bumper Stiffener Lower Removal/Installation
1. Disconnect the negative battery cable..
2. Remove the following parts:
a. Seal board upper.
b. Front bumper.
c. Seal plate.
d. Front under cover No.1.
3. Remove bolts A.
4. Pull the bumper stiffener lower in the direction of the arrow (1), (2) shown in the figure, detach hooks B.
5. Remove the bumper stiffener lower in the direction of the arrow (3) shown in the figure.
6. Install in the reverse order of removal.
Bumper Slider Removal/Installation
Front Bumper Slider
1. Disconnect the negative battery cable..
2. Remove the seal board upper..
3. Remove the front bumper..
4. Remove bolts A.
5. Pull the front bumper slider in the dire ...
Center Under Cover Removal/Installation
1. Lift up the vehicle.
2. Remove the floor under cover..
3. Remove bolts.
2WD
AWD
4. Remove the center under cover.
5. Install in the reverse order of removal. ...
Other materials:
Front Seat Cushion Frame Removal/Installation
WARNING:
Handling a side air bag improperly can accidentally operate (deploy) the
air bag, which may seriously injure you. Read the service warnings/cautions
in the Workshop Manual before handling the front seat (side air bag integrated)..
If the sliding mechanisms on both side ...
Global Positioning System (Gps) Antenna
Purpose, Function
The GPS antenna receives signals sent from GPS satellites and sends them
to the car navigation unit.
NOTE:
GPS (Global Positioning System) was developed by the Pentagon (U.S.A.) as
an object locating system using satellites. The GPS antenna receives signa ...
Rear Body Control Module (Rbcm)
Outline
Positioned at the rear of the vehicle, the rear body control module (RBCM)
performs numerous system controls for functions at the vehicle rear.
Function
The rear body control module (RBCM) controls the system based on the input/output
signals.
The functions ...
